Monitoring network signal, two in one, multifunctional power supply, lightning protector, household protection surge
Product Details
The control signal network lightning protection dual protection device is designed and manufactured according to the standard of IEC and GB, and meets the requirements of IEEE802.3AT. It is suitable for the server, wireless AP, network camera, network switch, computer communication system, monitoring and control system, door control system, automatic control system, and security system, which are powered by POE network wire. Lightning protection and surge protection for all kinds of signal circuits, such as data transmission, etc.
Product specification
| Type |
TRSS-RJ45 |
| Max continuous operating voltage Uc(VAC) |
5V |
| Nominal discharge current (8/20μS) ln(kA) |
5kA |
| Voltage protection level Up(kV)≤ |
20V |
| Adaptive date transfer rate |
100/1000Mbps |
| Insertion loss |
≤1dB |
| Respeonse Time |
≤1ns |
| Protect network lines |
1~8 |
| Surface Properties |
100x25x25 |
| Line interface |
RJ45 |
| Way to lnstall |
Series Connection |
Working principle of product
During the operation of the equipment, the lightning arrester will play a protective role once the abnormal voltage occurs. When the protected device is running under normal working voltage, the arrester will not work, and it will be regarded as a circuit for the ground. Once the high voltage is present and the insulation of the protected equipment is endangered, the lightning arrester acts immediately and leads the high voltage impact current to the earth, thus limiting the amplitude of the voltage and protecting the insulation of the electrical equipment. When the overvoltage is gone, the arrester is restored to its original state quickly, so that the system can supply electricity normally. The main function of the lightning arrester is to reduce the voltage value of the protected equipment through the action of parallel discharge gap or nonlinear resistance, and to reduce the voltage value of the protected equipment, so as to protect the power equipment.
Use of attention
1. identify the input / output interface identifier of the lightning protector, input the external line and output the device.
2. grounding lines should be short, thick and straight, so as to reduce the influence of distributed inductors on the ability of lightning electromagnetic pulse.
3. the grounding of the signal protector should be connected to the grounding grid through the electronic switch.
4. the lightning protector is connected between the protected device and the signal channel in series.
Product features
1. traffic flow to further improve safety
2. limit the precision of the voltage to say how much!
3. installation and use of convenient novice can also be easy to install
4. strict product structure, meticulous and comprehensive protection
Company profile
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products
Product Tags:
|
|
Ethernet lightning surge arrester power surge protection device signal SPD protector Images
|
