T1 series surge protection device provide commercial grade AC power protection
Brief introduction
The surge protector is a lightning protection measure adopted by Zhejiang toer Electric Co., Ltd. for the electrical system. It is a protective device for lightning protection and pressure protection in household, third industry and industrial fields. It is mainly used to limit overvoltage and discharge electric current. Surge protector is usually connected with protected equipment. When overvoltage is generated, it can play the role of shunting and voltage limiting. To prevent excessive current and voltage damage to equipment, play the role of protection devices.
Product features
1. Easy to install with small sizes
2. built-in overheating and temperature control circuit breaker
3. strict product structure, meticulous and comprehensive protection
Product specification
| Model |
|
TRS-A15 |
TRS-A25 |
TRS-A50 |
| Rated Operating Voitage |
UC |
320 |
320 |
320 |
| Voltage protective level |
Up(KV)≤ |
1.2 |
1.5 |
1.7 |
| Max discharge current |
Imax(8/20μS) |
15 |
25 |
50 |
|
Nominal discharge current
|
In(8/20μS) |
15 |
25 |
50 |
| Ressponse time |
NS |
<25 |
| Lndication of invalidation |
Aging invalidation:green Normal,red:Invaldation |
| Operating condition |
Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
|
Remote signal function
|
Can also picking |
| Remarks |
Other max continuous operating voltage can be customized |
|
Working principle of product
Under normal working condition, the lightning protection module is in a high resistance state. When the power supply line has lightning invasion or operation transient overvoltage, the lightning protection module will immediately pass through the response speed of nanosecond level, and limit the lightning overvoltage or transient overvoltage to the voltage range allowed by the electrical equipment, thus protecting the normal operation of the electronic equipment. After that, the lightning protection module quickly returns to the high impedance state without affecting the normal power supply of the grid.
Use of attention
1. lightning arresters are connected in series
2. The PE line of the lightning arrester must be reliably connected with the ground wire of the lightning protection system, and the connection line is short, thick and straight.
3. The PE line of the lightning arrester must be reliably connected with the ground wire of the lightning protection system, and the connection line is short, thick and straight.
Company profile
Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.
Product Tags:
|
|
Commercial Grade Type 1 Surge Protection Device 275V 25KA Remote Signal Function Images
|
